AB-6529
8
Mounting Dimensions
DIN rail mounting
Fig. 6 shows the mounting dimensions of Infilex GD on the DIN rail.
Mount and fix Infilex GD on DIN rail so that it does not fall from the DIN rail. Check that the DIN rail holders of each module are
pushed up and fixed on the DIN rail.
Fasten the bilateral sides of Infilex GD with two DIN rail mounting brackets (Part No. 83104567-001, separate order is required).
Notes:
1 Pitch between upper/lower duct and DIN rail.
2 Hatched area shows the maintenance space.
3 ‘n’ indicates the number of I/O module, UT module, integral type Operator Panel, and/or SAnet I/F module assembled with Infilex GD basic
unit.
4 DIN rail position is shifted 5 mm downward from the center of Infilex GD.
The width of Infilex GD may vary depending on the number of an I/O module, UT module,
integral type Operator Panel, and/or SAnet I/F module to be assembled. Their dimensions
are the same.
Width of Infilex GD = One module (30 mm)
n (quantity) + Infilex GD basic unit (60 mm)
Notes:
Panel mount type Operator Panel is not directly assembled with Infilex GD. To connect it to Infilex
GD, a UT module is required.
For details of panel mount type Operator Panel, please refer to Specifications/Instructions of
Operator Panel (AB-6546).
For details of I/O modules and user interface modules that can be assembled with Infilex GD, refer
to Specifications/Instructions of I/O modules and user interface modules (AB-6527).
I/O module (mm)
Figure 6. Mounting dimensions: DIN rail mounting (mm)
30
DIN rail mounting brackets for bilateral sides
Part No. 83104567-001
Duct
Duct
Infilex GD
(45
) 3
5
140
(45)
(122.5)*
1
(132.
5)*
1
Duct
20
50
92
(60)
(60)
Duct
65 75
35
2
DIN rail holder
Infilex GD
basic unit
DIN rail
Infilex GD
60 + 30
n*
3
Hook
I/O modules, UT
module, integral type
Operator Panel,
SAnet I/F module
5*
4
106
