background image

AB-6439 

10 

Maintenance (Lithium Battery Replacement) 

Replace the lithium battery for backup (Part No. 83104934-001) every 5 years. 

IMPORTANT: 

  Only authorized service personnel is allowed to replace the battery. 

  Do not touch the power supply unit when replacing the battery. 

  Since the remaining battery capacity cannot be checked by measuring the terminal voltage, be sure to replace 

the battery every 5 years. 

  Replace the lithium battery with the power ON. 

  Replace the lithium battery every 5 years if the product is always in use (in ON state). 

  If the product has never or hardly been operated (in OFF state) for a year, replace the lithium battery before the 

product operation. 

 

Battery replacement 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  Replace the battery with the Infilex ZM in ON state. 

 

Figure 11.  Battery replacement 

 

1)  Pull out the battery holder using a slotted screwdriver. 

2)  Disconnect the connector and detach the lithium battery from the battery holder. 

3)  Place a new lithium battery in the battery holder and connect the connector to it. 

4)  Insert the battery holder into the main unit. 

5)  Fill in the date for next replacement (5 years after the replacement) on the tag using an oil-based pen. 

1) 
 
 
 
 
 
 
 
 
4) 

Lithium battery 
for backup 

2)

3)

Infilex ZM 

main body 

Battery holder        Battery Connector 

5) 

Содержание Infilex ZM WY5122













Отзывы: