Azbil ATT082, Краткое руководство пользователя, Страница: 19 / 32

15
Chapter 5 Wiring
5-5. Post-connection check
Device condition and specifications Notes
Is the device or cable undamaged (visual
check)?
--
Electrical connection Notes
Does the supply voltage match the
specifications on the nameplate?
• Head transmitter: U=11 to 42 V DC
•
SIL mode: U=11 to 32 V DC for the head
transmitter or U=12 to 32 V DC for the DIN
rail transmitter
Do the cables have adequate strain relief? --
Are the power supply and signal cables
correctly connected?
(Refer to page 11.)
Are all the screw terminals well tightened
and have the connections of the spring
terminals been checked?
--
Are all the cable entries installed,
tightened and sealed?
--
Are all housing covers installed and
firmly tightened?
--