Azbil ATT082, Краткое руководство пользователя, Страница: 11 / 32

7
Chapter 3 Identification
Chapter 3. Identification
3-1. Device designation
The following options are available for identification of the device:
•
Nameplate specifications
3-1-1. Nameplate
The right device?
Compare and check the data on the nameplate of the device against the requirements of
the measuring point:
1 2
3
4 5
11-42V
012345678910
xx.yy.zz
ATT082-XXXXX
Made in Germany 2011
D-87484 Nesselwang
Ser.no.:
FW:
Input:
12345678ABCDEFGH
12345678ABCDEFGH
Current consum.: 23,6 mA
Dev.Rev: 1
Ext. ord. cd.:
XXXXXXXXXXXXX#
II3G Ex nA II T6/T5/T4 Ta= -40 ...+ 55/70/85°C
II3G Ex nL IIC T6/T5/T4 Ta= -40 ... +55/70/85°C
EH 08.001X
Install per CM2-ATT082-2001
6
0044
Figure 3-1. Nameplate of the head transmitter (example, Ex version)
1. Power supply, current consumption and extended order code
2. Serial number, device revision and firmware version
3. Approvals with symbols
4. 2 lines for the TAG name
5. Approval in hazardous area with number of the relevant Ex documentation
6. Order code and manufacturer ID
3-2. Scope of delivery
The scope of delivery of the device comprises:
•
Temperature transmitter
•
Mounting material
•
Hard copy of Brief User's Manual
•
Additional documentation for devices which are suitable for use in hazardous areas, such
as Safety Instructions, Control or Installation Drawings.
3-3. Certificates and approvals
The device left the factory in a safe operating condition. The device complies with the
standards EN 61 010-1 “Protection Measures for Electrical Equipment for Measurement,
Control, Regulation and Laboratory Procedures” and with the EMC requirements of IEC/
EN 61326.