AB-7043
9
Installation
IMPORTANT:
Do not install this product in an atmosphere containing corrosive gas or explosive gas.
Do not install this product in a location exposed to direct sunlight. Direct sunlight accelerates LCD degradation.
Waterproof box (optional) is required for the product to be installed outdoors. Ask our sales personnel for the
waterproof box.
Procedure
1) Make two holes for two M4 tapping screws (one for upper and the other for lower sides) on a mounting location, such as an
AHU side plate or a panel cabinet. Distance between the centers of upper and lower M4 screws is 66
2 mm.
2) Lead the cable (connected to the base plate terminals) out of the base plate through the base plate conduit (on the bottom
right), and mount the base plate on the mounting location with the two M4 tapping screws (accessory of Display Panel).
Figure 10. Mounting of the base plate with two M4 tapping screws
3) Assemble the case with the base plate by inserting the male insertion guide of the case into the female insertion guide of the
base plate. Four insertion guides are provided on the right and left sides (Two on each side). Press the case well so that the
case is completely assembled with the base plate. The case is connected to the base plate with the internal connector.
Figure 11. Case assembly with the base plate
Base plate
Two M4 tapping screws
Cable conduit
Hook to detach the case from the base plate
Wiring label
Cable
Insertion guides
(female)
Insertion guides
(male)
Case