Azbil ACTIVAL FC200, Спецификации и инструкции

Страница: 6 / 20

AB-6675
6

Actuator specifications
Item Specification
Power supply 24 V AC

15 %, 50 Hz/60 Hz
Power consumption 10 VA
Timing 63

5 sec (50 Hz) / 53

5 sec (60 Hz)
Control signal SAnet
Sub-DI
(contact input) Input type Potential free (dry) contact input
Voltage, current 20 V DC, 5 mA (

Unlike Models VY516XK, VY516XH, this product does not have forced
fully-close input.)
Sub-DO
(contact output) Output type Potential free (dry) contact output
Contact rating 200 V AC/24 V DC, Max. 0.5 A (2 A at startup)
Min. applicable load 24 V DC, 5 mA
LED indication
Description
Initializing Continuous ON

LED indication corresponding to the operating status (after initializing is
complete.)
Normal Repetition of
1-second ON

1-second OFF.
Major alarm Continuous ON.
Minor alarm Repetition of
1-second ON

0.25-second OFF

0.25-second ON

0.25-second OFF.
Communication error
(and minor alarm)
Repetition of
0.25-second ON

0.25-second OFF
Manual operation Repetition of
0.25-second ON

0.25-second OFF

0.25-second ON

1.25-second OFF.
Error during
manual operation
Repetition of
0.25-second ON

0.25-second OFF

0.25-second ON

0.25-second OFF

0.25-second ON

0.75-second OFF.
Communication Transmission system Voltage transmission (SAnet)
(via SAnet) Transmission speed 1200 bps
Transmission distance Transmission distance varies depending on the number of devices and the type of devices to be
connected to. For details on the transmission distance, refer to Installation Manual of Intelligent
Component Series for SAnet Communication (AB-6713).
Materials Case Die cast aluminum
Top cover, terminal cover Polycarbonate resin (Color: gray)
Yoke Steel plate
Surface finishing Case None
Yoke Electro-galvanized (Bright chromate finish)
Valve position indication Pointer located at the bottom of the actuator shows the position by pointing at the value of the
scale (0 to 100) on front, rear, and bottom sides.
(0: B-AB (Port B fully open) to 100: A-AB (Port A fully open))
Manual operation Available. Refer to the section Manually opening/closing the ACTIVAL .
Wires connection M3.5 screw terminal connection
Enclosure rating IEC IP54 (dust-proof and splash-proof)
Insulation resistance Between terminal and case: 5 M

or higher at 500 V DC
Dielectric strength Between terminal and case: 500 V AC/min with 5 mA or less leakage current
0.25s
0.25s
0.25s
0.25s 0.25s
0.75s
ON
OFF
0.25s
0.25s 0.25s
1.25s
ON
OFF
0.25s
0.25s
0.25s
0.25s 0.25s
0.25s
ON
OFF
0.25s
1s
0.25s
0.25s
0.25s
ON
OFF
1s
1s
ON
OFF