Ayrton Mistral S, Руководство пользователя, Страница: 34 / 36

33
Magenta Color wheelEr
(Magenta Color wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The CMY -movement is not located in the default
position after the reset
.
Yellow Color wheelEr
(Yellow Color wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The CMY -movement is not located in the default
position after the reset
.
CTOwheelEr
(CTOwheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the stepper motor is
defective (or its driving IC on the main PCB)
.
The CTO -movement is not located in the default
position after the reset
.
Rot_Gobo1wheelEr
(Rot_Gobo1wheel - error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the steppermotor is
defective (or its driving IC on the main PCB)
.
The Rot_Gobo1 - movement is not located in the
default position after the reset
.
Fix_GobowheelEr
(Fix_Gobowheel - error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the steppermotor is
defective (or its driving IC on the main PCB)
.
The Fix_Gobo - movement is not located in the
default position after the reset
.
AnimationwheelEr
(Animationwheel - error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the steppermotor is
defective (or its driving IC on the main PCB)
.
The Animation - movement is not located in the
default position after the reset
.
IriswheelEr
(Iriswheel - error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the steppermotor is
defective (or its driving IC on the main PCB)
.
The Iris - movement is not located in the default
position after the reset
.
Prism_5 wheelEr
(Prism_5wheel- error) This message will appear after the reset of the fixture if the head’s
magnetic-indexing circuit malfunctions (sensor failed or magnet missing) or the steppermotor is
defective (or its driving IC on the main PCB)
.
The Prism_5 - movement is not located in the
default position after the reset
.