Ayrton Mistral S, Руководство пользователя, Страница: 27 / 36

26
When set to Manual Mode fixture will be back to factory settings
.
If want to adjust brightness
can adjust by shutter and dimming channel channel value is 0-255
.
Other functions can be set
according to user's real need
.
1 Double click to enter the menu
.
2 Turn the rotary knob clockwise then display
“
Test
”.
3 Double click to enter
“
Test turn the rotary knob to select
“
Manual control
”
.
4 Double click to enter
“
Manual control The display will show
“
PAN=XXX
”
.
5 Long press to exit the menu
.
9.5.4. Calibration
With this function you can calibrate and adjust the effect wheels to their correct positions
.
The
password of calibrate values is 050
.
1 Double click to enter the menu
.
2 Turn the rotary knob clockwise then display
“
Test
”.
3 Double click to enter
“
Test turn the rotary knob to select
“
Calibration
”
.
4 Double click to enter
“
Calibration The display will show
“
Password=050
”
.
5 Long press to exit the menu
.
9.6. Preset
1 Double click to enter the menu
.
2 Turn the rotary knob clockwise then display
“
Preset
”.
3 Double click to enter
“
Preset turn the rotary knob to select
“
Select prog
.”“
Edit
prog
.”“
Edit Scenes
“
Scenes Input
”
.
4 Long press to exit the menu
.
Run the auto program A master fixture can output to three different program signals to
the slave fixture to operate
.
It means the host will send cyclically in the following orders
(The host will keep operating the program of Part 1) Then the slave fixture will make
the selectively receiving according to its own set
.
1 If the slave fixture chooses Run For Slave 1 from the menu of 1-3,then it will receive
the part 1’s automatic program from link
in the same way when the slave fixture
chooses Run For Slave 2 then it will receive the part 2’s automatic program from link
.
2
Enter the menu of 1-3 Function Mode---Set To Slave Here to set machine operate
which part of the program during the host-slave connection
3 Enter the menu of 1-4 1-5 Function Mode---Set To Master
4 Enter the menu of 8-1 Edit Program---Auto Program Part1
.
The host outputs three
groups driven program---Part1 Part2 Part3(Part1 program runs the same effect as the
host)
5 Enter the menu of 8-2 Edit Program---Edit Program
.
Edit the program’s connection
connect the scene in order
6 The editor of the scene there are as many as 250 scenario editors and every scene can
have a program connection of 10
.
Note:
Part 2 Part3 repeat in accordance with the Part1’s repeat
.
For example When Part 1