Ayra ERO L90, Руководство пользователя

Страница: 8 / 12

8
9 Prism rotation 0-127 Prism indexing
128-189 Prism rotation forward (Slow
– Fast)
190-193 No rotation
194-255 Prism rotation backward (Slow
– Fast)
10 Focus 0-255 Continuous adjustment (Far
– Near)
11 Shutter/Strobe 0-31 Shutter closed
32-63 No function (shutter open)
64-95 Strobe effect (slow-fast)
96-127 No function (shutter open)
128-159 Pulse-effect in sequences
160-191 No function (shutter open)
192-223 Random strobe (Slow
– Fast)
224-255 No function (shutter open)
12 Dimmer 0-255 Dimmer 0-100%
13 Pan/tilt movement
speed 0-225 Maximum to minimum speed
226-235 Movement trigger blackout
236-245 Wheel changes trigger blackout
246-255 No function
14 Reset functions
and internal
prorgrams
0-39 No function
40-79 Macro
80-84 All motors reset
85-87 Scan motors reset
88-90 Color motors reset
91-93 Gobo motors reset
94-96 No function
97-99 Other motors reset (prism, focus)
100-119 Internal program 1
120-139 Internal program 2
140-159 Internal program 3
160-179 Internal program 4
180-199 Internal program 5
200-219 Internal program 6
220-239 Internal program 7
240-255 Auto program, music-activated
To connect several ERO L90 movingheads in DMX mode, use standard XLR
– XLR cable and apply a
DMX-terminator at the end of the DMX-chain. A DMX terminator is a standard XLR connector, with a
typical 120 Ohm resistor between pin 2 and 3, to exterminate the signal. This prevents reflections in
your signal, which may cause flickering and unwanted behavior from your intelligent lighting fixtures.