Ayra ERO L90, Руководство пользователя

Страница: 5 / 12

5
Setting up the unit
The ERO L90 movinghead will reset itself after activating it. There is a possibility that shocking
movement and flickering takes place, as the fixture has to calibrate all 0-points for every stepping
motor (pan, tilt, gobowheel, colorwheel, prism, etc.). Give the movinghead time to calibrate all stepping
motors. When this is finished, the movinghead will turn to its last used function, which is mostly DMX,
while displaying the DMX address. The display shows the following codes:
Menu
item Submenu Feature Value Description
1 ADDR AXXX
A001 - Indicates the starting address while set
to DMX mode (A001 is also used for
slave devices)
2 PLAY RUN MSTR/ALON Run this fixture
as ‘master’ or ‘stand-
alone’ in automatic mode
AUDI MSTR/ALON
Run this fixture as ‘master’ or ‘stand-
alone’ in music controlled mode
AUTO Clos/Hold/Auto/Audi No DMX status
3 RESE ALL - Reset all stepping motors and return to
blackout mode
SCAN - Reset only pan/tilt motors
COLR - Reset only color wheel motor
GOBO - Reset only gobo/gobo rotation motor
OTHR - Reset other motors (prism etc.)
4 RPAN ON/OFF - Reverse pan movement
5 RTLT ON/OFF - Reverse tilt movement
6 FINE ON/OFF - Switch between 8-bit and 16-bit
movement
7 MIC M-XX
M-70 - Microphone sensitivity (for music
controlled mode)
8 DISP VALU D-XX
D-00
DXXX Display the value of each DMX-channel
D ON ON/OFF Turn the display off after 2 minutes of
menu-inactivity
FLIP ON/OFF Flip the display 180 degrees for easy
display reading while in hanging
position
9 SET DFSE ON/OFF Reset all fixtures to default settings
FEED ON/OFF Pan/tilt automatic error correction
ON/OFF
FANS AUTO/HIGH/LOW Fan mode selection
SAVE OFF/1-99M 15M Stand-by mode (Power save mode)
VER V1.0
– V9.9
Software version
FIX CODE CXXX = Fixture code (Code = C050)
CH01
– CHXX
XXXX (-128
– 127), Motor fix
10 Edit SEPR AUTO
IP01
– IP07
Select program to be edited
STEP S-01
– S-48
Select step to be edited
SCXX C-01
– C-XX (with
value 0-255 per
channel)
Edit the channels and values of each
scene
TIME (XXX, value
001
– 999)
Set the time for each scene
CEDT ON/OFF Edit program with controller
REC. RE.XX Auto save function
RUN ON/OFF Program test function