Ayra ERO L90, Руководство пользователя

Страница: 6 / 12

6
Working modes:
The ERO L90 movinghead is equipped with several working modes, which makes it possible to use
the fixture for simple events (such as tradeshows or diners), but also for advanced purposes, such as
festivals, clubs and big events.
- Stand alone mode:
- Automatic mode: The fixture will run one of the internal programs on a certain pre-defined
speed
- Music controlled mode: The fixture will run one of the internal programs to the beat of the
music, with a pre-defined microphone sensitivity.
- Master/Slave mode:
Several fixtures are connected with XLR
– XLR cables, but without the use of a DMX-
controller. The first fixture in line is the master which will run one of the internal programs on a set
speed or music controlled, while the other connected fixtures will mimic the first fixture, thus creating
synchronized light shows.
- DMX mode:
Control the fixture with a standard DMX controller or DMX software. With 14 DMX-channels
you have full control over the several features that the ERO L90 has to offer:
Channel 1: Pan
Channel 2: 16-bit Pan (fine)
Channel 3: Tilt
Channel 4: 16-bit Tilt (fine)
Channel 5: Color wheel
Channel 6: Rotatable gobo’s
Channel 7: Gobo rotation speed and direction
Channel 8: Rotatable p
risms and macro’s
Channel 9: Prism rotation speed and direction
Channel 10: Motorized focus
Channel 11: Strobe (0-13 Hz), Shutter close/open, random strobe
Channel 12: Dimmer control (0-100%)
Channel 13: Speed control (pan/tilt movement, blackout selection)
Channel 14: Special (internal program control triggering, lamp on, motor reset, lamp switch off)