Don’t put the machine on a place with water or other
liquid.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent, or similarly
qualified person, in order to avoid a hazard.
Don’t spatter water or oil into machine.
Don’t put hard objects between fan blades.
Don’t repair the machine by yourself. Dealing with
problems by non-professional person may cause
danger, even power cord replacement must be done
by professional electrician.
Only use accessories from suppliers, otherwise
danger and damages of the machine may be caused.
Place the machine on flat ground, and keep it far
from around things at least 50cm.
Make sure the socket can be reached from machine
location.
Keep the machine stand upright so that compressor
can work well.
Don’t run the machine near to gasoline or any other
flammable liquids.
Make sure free access of air-inlet and air - outlet.
Don’t use spraying agent (such as pesticides, paint)
or other flammable materials, otherwise plastic
deformation, or even electric damage of the machine
may be caused.
Make sure no damage in plug.
Don’t use connector instead of plug.
Insert plug into socket first, press key “POWER” to
run machine.
Warning
: before using the portable air conditioner,
keep it upright for at least two hours.
After the air conditioning is installed, ensure that the
power plug is intact and firmly plugged into the
power outlet, and place the power cord orderly to
prevent someone from being tripped or pulling out
the plug.
Be aware that refrigerants may not contain an odour.
Warning
: Appliance shall be installed, operated and
stored in a room with a floor area larger than 11 m².
Any person who is involved with working on or
breaking into a refrigerant circuit should hold a
current valid certificate from an industry-accredited
assessment authority, which authorises their
competence to handle refrigerants safely in
accordance with an industry recognised assessment
specification.
Servicing shall only be performed as recommended
by the equipment manufacturer. Maintenance and
repair requiring the assistance of other skilled
personnel shall be carried out under the supervision
of the person competent in the use of flammable
refrigerants.
All working procedure that affects safety means
shall only be carried by competent persons.
This machine just for domestic use, please don’t use
it in any other places.
Please use this machine indoor not outdoor, and
place it in a dry environment.
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision
The appliance shall be installed in accordance with
national wiring regulations.
Please make the machine far from heat sources and
avoid direct sunlight.
Please turn - off the machine first before pull out the
plug.
Please pull out the plug when the machine is under
cleaning, parts-replacement or leaving unused.
Please clean the machine based on the instruction in
user’s manual.
Please make sure using voltage meet requirements,
the damages caused by connection error is out of the
scope of warranty.
Don’t let little children touch the machine.
Don’t run the machine when no one there, even if a
short leave, please turn - off it.
Don’t tug power cord when pulling out plug or moving
the machine.
GB
82
|
83
TROUBLE SHOOTING
If conditions listed below occurs, please check the following items before calling
the customer service.
If problems not listed in the table occur or recommended solutions do not work,
please contact the professional service organization.
The remote control is
not aligned with the
direction of the remote
control receiver.
The distance between
the machine and the
remote control is too far.
The remote
control does not
work.
The pipe temperature
sensor is abnormal.
The overflow indicator
lights
.
The doors or windows
are not closed.
Check the pipe temperature sensor
and related circuitry.
Let the remote control get close to
the air conditioning, and make sure
that the remote control directly faces
to the direction of the remote control
receiver.
Restart the air conditioning after
power off and draining, then it will
become normal.
Make sure all the windows and doors
are closed.
There are heat sources
inside the room.
Remove the heat sources if possible.
Exhaust air hose is not
connected or blocked.
Connect or clean the exhaust air
hose.
Temperature setting is
too high.
Reset the temperature.
The ground is not level
or not flat enough.
Noise
Place the unit on a flat, level ground
if possible.
The ambient
temperature is too low
or too high.
Recommend to use the machine in at
the temperature of 7 - 35 °C (44-95
°F).
Room temperature is
lower than the setting
temperature. (Cooling
mode)
Reset the temperature.
In dehumidifying mode,
the ambient
temperature is low.
The machine is placed in a room with
an ambient temperature of greater
than 17 °C (62 °F).
Check the room temperature sensor
and related circuitry.
The room temperature
sensor is abnormal.
Troubles
Possible Causes
Suggested Remedies
The air
conditioning
doesn’t work
Not plug in.
Plug in.
Not cool enough
Air inlet or air outlet is
blocked
.
Remove the blockage.
Overheat protection
starts.
Compressor
doesn’t work.
Wait for 3 minutes until the
temperature is lowered, and then
restart the machine.
Displays 'E1'
Displays 'E2'
Batteries are dead.
Replace batteries.
