2
1-
Mechanical Installation
Press the spring mechanism at the bottom
of EVOS LOP with a screwdriver and open
the front cover.
Mark the cable screw holes by placing the
backplate where you want to install.
•
Drill holes for M6.5 dowels. (as shown
by “X” in figure
).
•
Drill a hole in the wall which the
40*28mm rectangular socket coming
from the controller can pass trough
(B).
•
Insert 4 dowels into the drilled holes.
(X)
Fix the backplate to the wall using 4 M4*30
screws to complete the mechanical
installation.
