*IMPORTANT: BEFORE BEGINNING ANY OF THE
FOLLOWING, DISCONNECT THE NEGATIVE BATTERY
TERMINAL TO PREVENT AN ACCIDENTAL SHORT CIRCUIT.
WIRING CONNECTIONS
FROM THE 20 PIN HARNESS:
• Connect the Red wire to the ignition/accessory wire of the aftermarket radio
• Connect the Orange/White wire to the illumination wire of the aftermarket radio. If
the aftermarket radio has no illumination wire just tape off the Orange/White wire.
• Connect the Blue/White wire to the amp turn on wire of the aftermarket radio.
• Connect the Brown wire to the mute wire of the aftermarket radio. If the
aftermarket radio does not have a Mute wire, tape up the Brown wire.
• The Black/Yellow wire will not be used in this application.
FOR NON-AMPLIFIED SYSTEMS:
• Connect the White wire to the left front positive speaker output of the
aftermarket radio
• Connect the White/Black wire to the left front negative speaker output of the
aftermarket radio
• Connect the Gray wire to the right front positive speaker output of the
aftermarket radio
• Connect the Gray/Black wire to the right front negative speaker output of the
aftermarket radio
1
