2
FOR AMPLIFIED SYSTEMS:
• Connect the White rca to the left front low level output of the aftermarket radio
• Connect the Gray rca to the right front low level output of the aftermarket radio
• Connect the Green rca to the left rear low level output of the aftermarket radio
• Connect the Violet rca to the right rear low level output of the aftermarket radio
The following wires are for the aftermarket radios that have navigation built in:
• Connect the Green wire to the parking brake wire of the aftermarket
navigation radio
• Connect the Blue/Pink wire to the VSS or speed sense wire of the
aftermarket navigation radio
• Connect the Green/Purple wire to the reverse wire of the aftermarket
navigation radio
FROM THE 22 PIN HARNESS:
• Connect the Black wire with the ring terminal to the back of the aftermarket
radios chasis
• Connect the 3.5mm jack to your aftermarket radios steering wheel control input
(if equipped)
NOTE: If using an Eclipse or Kenwood radio, use supplied female 3.5 adaptor
FOR KENWOOD RADIOS:
Connect the Kenwood SWC wire (normally Blue/Yellow) to the Brown wire of the 3.5
jack. Isolate and tape the Brown/White wire, it will not be used.
