9
REV. 11/2/21 INSTAXDSPX-FD3
MOBILE APP
(CONT.)
Crossover Adjust
• Selecting
High Pass
and
Low Pass
will provide one crossover frequency adjustment.
Selecting Band Pass will provide two crossover frequency adjustments: one for low pass,
and one for high pass.
• Select the desired crossover slope per channel, 12db, 24db, 36db, or 48db.
• Select the desired crossover frequency per channel, 0hz to 100khz.
Note:
The front and rear channels default to a 100Hz high pass filter to keep the low
frequency signals out. If a subwoofer is not being installed, change the front and rear
crossover points down to 20Hz for a full range signal, or to the lowest frequency the
speakers will play.
Continued on the next page
