2
APPLICATIONS
CONNECTIONS TO BE MADE
Attention!
This interface will work with models that are either non-amplified, or amplified.
Please follow the instructions carefully for your model vehicle. Failure to do so will result in
either no sound, or low sound. If you are unsure if your vehicle is factory amplified or not, please
contact your local dealership.
For models
without
a Sony/THX amplifier:
From the 16-pin harness with stripped leads to the aftermarket radio (harness included with interface):
• Connect the
Red
wire to the accessory wire.
Note:
If installing either an ASWC-1 or AX-LCD (both sold separately), connect the (2)
Red
wires on the AX-ADFD01 harness as well.
• If the vehicle is equipped with a factory subwoofer, connect the
Blue/White
wire to the
amp turn on wire.
• If the aftermarket radio has an illumination wire, connect the
Orange/White
wire to it.
• If the aftermarket radio has a mute wire and the vehicle is equipped with SYNC, connect
the
Brown
wire to it. If the mute wire is not connected, the radio will turn off when SYNC
is activated.
• Connect the
Gray
wire to the right front positive speaker output.
• Connect the
Gray/Black
wire to the right front negative speaker output.
• Connect the
White
wire to the left front positive speaker output.
• Connect the
White/Black
wire to the left front negative speaker output.
Continued on the next page
FORD
Econoline *
2014-up
Econoline
2009-2013
Edge (with NAV)
2007-2010
Escape
2008-2012
Expedition
2007-2014
Explorer (with NAV)
2009-2010
Explorer Sport Trac (with NAV) 2009-2010
F-150 *
2009-2012
F-150 STX/FX2 base/XLT base
2013
F-150 STX/XLT base
2014
F-250/350/450/550 XL/XLT *
2013-2016
F-250/350/450/550 (with NAV)
2011-2012
F-650/750 *
2016-up
Focus
2008-2011
Fusion
2010-2012
Mustang
2009-2014
Taurus
2010-2012
LINCOLN
MKX
2007-2010
MKZ
2007-2009
Navigator
2007-2014
MAZDA
Tribute
2008-2011
MERCURY
Mariner
2008-2011
Milan
2010-2011
Mountaineer (with NAV)
2009-2010
* With AM/FM/CD radio
