Axon Body 3 Dock
Installation Manual
Axon Enterprise, Inc.
Page 10 of 25
5.
Plug the power cord into the dock.
6.
Connect the other end of the power cord to a standard power outlet.
For 8-Bay Docks, the green power LED on top of the dock will light up when the dock is
powered. For 1-Bay Docks, check for power by placing an Axon Body 3 camera in the
dock and looking for the charging icon on the camera display.
Once a dock is installed, it can be used to register and charge Axon Body 3 cameras.
Dock Registration
Registration and configuration of Axon Body 3 Docks is not required, but registering does
make inventory management of your docks, including returns through Axon Evidence, much
easier. Your dock must be registered to use the Device Profile page in Axon Evidence.com.
Axon recommends the following best practices:
•
Use Axon Device Manager (ADM) to register and name Axon Body 3 Docks for
inventory and management purposes.
When using the ADM Tap Device option to look for the NFC tag, hold your mobile
device near the icon on the dock. For the 1-Bay dock, the icon is on the side of the
dock nearest to the Ethernet port. For the 8-Bay dock, the icon is near bay 1, on the
side of the dock near the power connection.
•
Use logical names when changing the Device Name in Axon Evidence.com. That will
assist in understanding the location and purpose for the Axon Body 3 Docks.
•
Use the
feature in Axon Evidence.com if you have more than one
location with Axon Body 3 Docks.
Power
connection
