Axminster 107715, Оригинальное руководство пользователя, Страница: 31 / 52

Setting Up the Machine
31
Fig 107-108
Inner guard
Mounting plate
4. Loosen the bolts holding the riving knife, see fig 108.
Adjust the knife until the required clearance is correct
and then retighten the bolts. Replace the inner guard
and crown guard.
1. Raise the clamping handle and slide the rip fence up
against the blade, see fig 109.
2. Look at the ‘RED’ line on the magnifying glass to check
it’s set to ‘0’ on the scale, see fig 110. If the scale is out of
alignment, loosen the fence rail (7) and tap the side until
the scale reads ‘0’ then re-secure the fence rail, see fig
111-112.-113
Rip Fence
Fig 109
Fig 110-111-112-113
Rip fence scale
out of alignment
Scale aligned with
the ‘RED’ index line