Axminster 107715, Оригинальное руководство пользователя, Страница: 16 / 52

Assembly
16
Fig 54-55-56-57-58
Fig 59-60
A B
24
Large threaded pin
29. Lift-up the 90˚ stop located to the corners of the
extension table, push the fence up against the stop,
see fig 59. Slide the fence (24) near the blade but not
touching, see fig 60 and tighten both knobs (A) and (B).
90˚ Stop
Blade
30. Locate the distance stop assembly (26). Loosen the
butterfly clamping knob beneath the fence assembly (24)
and pull out the telescopic fence section out. Loosen the
clamping handle on the distance stop (26), insert the ‘T’
bolt into the ‘T’ slot to the centre of the fence assembly
and slide the distance stop on, see fig 61-62.
Fig 61-62
26
Telescopic fence
Butterfly clamping knob
31. Locate the Workpiece support shoe (23), insert the
‘T’ bolt into the ‘T’ slot to the left side of the sliding table
(10), slide the shoe on and clamp in place with the
clamping knob, see fig 63.
Fig 63
23
‘T’ Slot
‘T’ Bolt