Axminster 107703, Оригинальное руководство пользователя

Страница: 24 / 42

CHANGING THE SPINDLE SPEED
24
Fig 63-64
F
G H
Close the access door, raise the spindle, reconnect the
machine to the mains supply. Give the machine a ‘quick’
burst check (i.e. quick ON-OFF) to ensure everything is O.K.
If everything is satisfactory, continue to use the machine.
OPERATING INSTRUCTIONS
• Feed the work piece straight across the machine table, holding
the fingers close together and guiding the work piece with the
palms of your hands.
Work Piece Handling
HSE (Health and Safety Executive)
Correct Operating Position
Position yourself offset to the machine as shown.
To operate the machine correctly, it is recommended to read
the HSE (Health and Safety Executive) information working
sheet on the safe use of the Spindle Moulder.
Spindle Chart
1,800
RPM
Spindle
3,000
6,000
9,000
Motor