Axminster 107703, Оригинальное руководство пользователя

Страница: 12 / 42

ASSEMBLY
12
5. Locate the two cap head screws/washers (B5), line up the
table support rod bracket (B7) with the two pre-drilled holes
beneath the extension table (B1) and secure in place with the
cap head screws (B5), see fig 29-30.
6. Place a straight edge across both tables and using a Hex key
adjust the two grub screws on the extension table (B1) until
both tables are level.
7. Place a level on the extension table (B1) and using two
spanners adjust nuts on the support rod (B7) until the
extension table is level.
8. Lift up the left 90˚ stop, see fig 34 lower the fence (B2) down
onto the extension table (B1) making sure the ‘PIN’ beneath the
fence engages into the hole on top of the extension table (B1).
Push the fence up against the 90˚ stop, see fig 35-36.
9. Slide the fence clamping bracket (B2) over the tables column
(B1) and tighten the butterfly nut. Lastly turn the fence locking
handle to secure it in position, see fig 37-38.
Fig 29-30
Fig 31-32
B7
Fig 34-35
90˚ Stop
B1
B1