AXMINSTER WORKSHOP AW368WL, Оригинальное руководство пользователя

Страница: 7 / 28

ASSEMBLY
7
Switch Control Box
Fitting The Tool Rest
Four Prong Drive/Live Centre
Fig 10
2. Place flat/spring washer over each cap head bolt.
Lineup the two holes in the angle bracket with the holes
in the left lathe stand, below the headstock and secure
in place with the two cap head bolts, see fig 11-12.
D
Fig 11-12
Locate the switch
control assembly (L).
Connect the male
plug into the female
socket to the rear of
the headstock
assembly, see fig 13.
The switch control box
(L) is magnetised and
can be positioned any-
where on the lathe for
ease of use, see fig 14.
Locate the tool rest (F), introduce the tool post into the
banjo and nip-up the locking handle, see fig 17.
Fig 13-14
Locate both drive centres and insert the four prong drive
(G) into the headstock drive shaft and the live centre (H)
into the tailstock barrel, see figs 15-16.
Fig 15-16
G
L
H
Fig 17
F