AXMINSTER WORKSHOP AW368WL Скачать руководство пользователя

Страница: 24 / 28

DECLARATION OF CONFORMITY

Axminster Tool Centre Ltd

EC DECLARATION OF CONFORMITY

‘original’

Product model:

Axminster Workshop AW368WL Woodturning Lathe

Name and address of the manufacturer:

Axminster Tool Centre Ltd, Unit 10 Weycroft Avenue,

Axminster, Devon EX13 5PH, United Kingdom

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Object of the declaration:

Axminster Workshop AW368WL Woodturning Lathe

The object of the declaration described above is in conformity with the relevant GB legislation:

Supply of Machinery (Safety) Regulations 2008 as amended.
Electromagnetic Compatibility Regulations 2016 as amended

References to the relevant harmonised standards used or references to the other technical
specifications in relation to which conformity is declared

Machinery Directive 2006/42/EC

IEC 60204-1:2016 - Safety of machinery - Electrical equipment of machines - Part 1:

General requirements.

EN 60204-1:2018 - Safety of machinery - Electrical equipment of machines - Part 1:

General requirements.

EN ISO 12100:2010 - Safety of machinery - General principles for design - Risk

assessment and risk reduction.

Additional information

Name and address of person authorised to compile the technical file:

Axminster Tool Centre

Ltd, Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH, United Kingdom

The machinery fulfils all relevant provisions of Supply of Machinery (Safety) Regulations 2008
as amended

Signed for and behalf of

: Axminster Tool Centre Ltd;

(place and date of issue):

Axminster, Devon, United Kingdom Kingdom, 7th July 2022

(name, function):

Andrew Parkhouse, Supply Chain Director

Signature

………………………………………………………………

Содержание AW368WL





























Результаты поиска

Содержание AW368WL

Отзывы:

Похожие инструкции для AW368WL

Бренды по названию

Популярные бренды

AXMINSTER WORKSHOP AW368WL, Оригинальное руководство пользователя

Результаты поиска

Содержание AW368WL

Отзывы:

Похожие инструкции для AW368WL

Бренды по названию

Популярные бренды