Axminster Trade G-800, Оригинальное руководство пользователя

Страница: 26 / 36

24
6.4 Full Dust Bin or Pressure Drop Alarm.
When a fault occurs, the indicator lights yellow, and the control panel will show the code: “Alarm”.
Except for the full dust bin alarm, the machine will continue to work.
If an “Error” occurs, the machine will stop.
Dust full alarm: Clean the dust bin.
Pressure drop alarm: Refer to chapter 6.3.
6.5 Convertor Error and Alarm.
The error and alarm code will show on the OLED display. In most situations, powering off the
machine and restarting the machine after 5 minutes will eliminate the error codes.
For the most common error and alarm code information see the next table. If you are unable to
solve the problem, please contact your distributor.
Code Trouble description Solution
Error
code
F1 Current overage
Reduce the cord length to less than 15m.
Check the motor cord and motor for a short circuit or
incorrect grounding.
Check if the motor is overloaded or stalled.
Recommendation is to reduce the speed.
F2 Voltage overage
Check the power supply voltage. The allowed voltage
range is 220-240V.
F3 Voltage shortage
Check the power supply voltage. The allowed voltage
range is 220-240V
F4 Convertor overheated
Check if the convertor fan is working.
Check if the motor is overloaded or stalled.
Recommendation is to reduce the speed.
F11 Motor overheated
Check if the motor is overloaded or stalled, suggest
reducing the speed.
Alarm
code
A501
Reach the max. current
size
Reduce the cord length. Make sure it is less than 15m.
Check the motor cord and motor for a short circuit or
incorrect grounding.
Recommendation is to reduce the speed.
Code Trouble description Solution
Alarm
code
A502
Reach the max.
oversized voltage
Check the convertor input voltage.
A503
Reach the min. voltage
shortage value
Check the convertor input voltage.
A504 Convertor overheat
Check if the convertor fan is working.
Recommendation is to reduce the speed.
A511 Motor overheat Recommendation is to reduce the speed.