Axminster Trade G-800, Оригинальное руководство пользователя

Страница: 19 / 36

17
Fig. 10-3
3. Delayed Stop Interface
When the dust collection operation is finished, the motor can be set up to “delayed stop” to
provide general air cleaning within the workspace. The delayed stopping countdown is preset to
10 minutes and can not be adjusted.
The operation steps are as followings:
(1) Switch to the Delayed Stop Interface by pressing
, as shown in Fig. 10-4 .
 No_delay
：
No delayed stop.
 Delay_10min: Delayed stop in 10 minutes.
(2) Press , move the cursor
“
>
”
to the desired mode.
(3) Press , the asterisk
“
*
”
will display in front of the desired mode indicating that the setting
is working now.
Note : If the delayed stop has been set, after pressing the Stop button, the machine will stop
automatically after a 10-minute countdown; If you want to stop the machine immediately, you
need to press the Stop button again before the countdown is over.
Fig. 10-4