Axminster Trade G-800, Оригинальное руководство пользователя

Страница: 16 / 36

14
5.1.1 OLED Display:
(Fig. 10)
Fig. 10
E1: Communications status between inverter and controller
“ N ” = Normal operation
“ - ” = No communication. Please contact technical service.
E2: Dust Bin Status
“ N ” = Dust bin not full
“ - ” = Dust bin is full (Yellow alarm light will be on)
E3: Displays inverter error codes
E4: Displays motor running speed (RPM)
E5: Displays the set speed (RPM) when in Speed Adjustment mode+or set power (W) when
in Flow Cruise mode .
E6: Delayed stop countdown
This displays the amount of time (shown in minutes) that the Gyro Air will continue to operate
on a timer before stopping. This is used to provide general air cleaning. The countdown time
is preset to 10 minutes and can not be adjusted.
E7: Pressure difference reading in Pascals (Pa)
Display will monitor air pressure for the readings of difference between air pressure before
and after filter.
E8: Relink Notice for the Synchronous Start
When the start/stop mode of the machine is set up to the linkage mode, if you Start or Stop
the machine manually (including the remote control), the mode will be changed into Manual
Start/Stop mode and the E8 area will show a flashing M
 A in the main interface indicating
that the Synchronous Start/Stop link needs be reset. When you press this button now, the
flashing M
 A disappears(as shown in Fig.10-1 ) indicating that the machine is relinked and
set up to linkage mode again.