Axminster Trade AT50LP Ultimate Edge, Оригинальное руководство пользователя

Страница: 6 / 24

Assembly
6
F
Graphite Pad
The ‘Graphite Pad’ is used to reduce the friction and heat
building between the abrasive belt and Linisher plate. This
will help to prolong the llife of the abrasive belt.
1. Remove the side access plate (G) and raise the linisher to the
upright position by loosening the two Hex screws (1), see fig 06.
Tighten the Hex screws to secure the linisher.
NOTE: IF YOU PREFER NOT TO USE THE
‘GRAPHITE PAD’ SKIP THIS STEP
Fig 06
2. Rotate the lever (2) to the side of the linisher, see fig 07-08.
Press down the lever to release the belt tension, see fig 09.
1
Fig 07-08
2
Fig 09
WORK TABLE
NOT INCLUDED