Axis XP40-Q1765 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 59

background image

XP40-Q1765 Explosion-Protected PTZ Network Camera

Technical specifications

Connectors

Network connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

NO

NO

NOTICE

TICE

TICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s
instructions. For information about regulatory requirements, see the Installation Guide available at

www.axis.com

Performance considerations

When setting up your system, it is important to consider how various settings and situations affect the performance. Some factors
affect the amount of bandwidth (the bitrate) required, others can affect the frame rate, and some affect both. If the load on the
CPU reaches its maximum, this also affects the frame rate.

The following factors are the most important to consider:

•

High image resolution or lower compression levels result in images containing more data which in turn affects the
bandwidth.

•

Access by large numbers of Motion JPEG or unicast H.264 clients affects the bandwidth.

•

Simultaneous viewing of different streams (resolution, compression) by different clients affects both frame rate and
bandwidth.

Use identical streams wherever possible to maintain a high frame rate. Stream profiles can be used to ensure that
streams are identical.

•

Accessing Motion JPEG and H.264 video streams simultaneously affects both frame rate and bandwidth.

•

Heavy usage of event settings affects the product’s CPU load which in turn affects the frame rate.

•

Using HTTPS may reduce frame rate, in particular if streaming Motion JPEG.

•

Heavy network utilization due to poor infrastructure affects the bandwidth.

•

Viewing on poorly performing client computers lowers perceived performance and affects frame rate.

•

Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and
the general performance.

58

«
...
56
57
58
59
»

Содержание XP40-Q1765




























































Отзывы:

Нет отзывов

Похожие инструкции для XP40-Q1765

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 40

Бренд: D-Link Страницы: 5

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 6

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 41

Бренд: Prime Controls Страницы: 12

Бренд: ZKTeco Страницы: 4

Бренд: Zircon Страницы: 2

IQeye Sentinel Series

Бренд: Iqinvision Страницы: 15

treeMOTION S.light USCA

Бренд: TEUFELBERGER Страницы: 152

Бренд: Godox Страницы: 14

Бренд: EverFocus Страницы: 2

Бренд: Northern Страницы: 2

Бренд: Aigis Mechtronics Страницы: 20

Бренд: ACTi Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды