background image

XP40-Q1765 Explosion-Protected PTZ Network Camera

About system options

Select

Obtain DNS server address via DHCP

to use the DNS settings provided by the DHCP server.

To make manual settings, select

Use the following DNS server address

and specify the following:

Domain name -

Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by

semicolons. The host name is always the first part of a fully qualified domain name, for example,

myserver

is the host name in the

fully qualified domain name

myserver.mycompany.com

where

mycompany.com

is the domain name.

Primary/Secondary DNS server -

Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is

optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under

System Options > Network > TCP/IP > Advanced

.

Select

Obtain NTP server address via DHCP

to use the NTP settings provided by the DHCP server.

To make manual settings, select

Use the following NTP server address

and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS
name. The host name is configured under

System Options > Network > TCP/IP > Advanced

.

Select

Obtain host name via IPv4 DHCP

to use host name provided by the DHCP server running on IPv4.

Select

Use the host name

to set the host name manually.

Select

Enable dynamic DNS updates

to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help

.

Link-Local IPv4 Address

Link-Local Address

is enabled by default and assigns the Axis product an additional IP address which can be used to access

the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static
or DHCP-supplied IP address at the same time.

This function can be disabled under

System Options > Network > TCP/IP > Advanced

.

HTTP

The HTTP port used by the Axis product can be changed under

System Options > Network > TCP/IP > Advanced

. In addition to the

default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under

System Options > Network > TCP/IP > Advanced

. In addition to

the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to

System Options > Security > HTTPS

. For more information, see

HTTPS on page 41

.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding
network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased
since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).

45

Содержание XP40-Q1765




























































Отзывы: