Axis Q6042, Руководство по установке

Страница: 27 / 164

AXIS Q60 Series
1
Cable holders
2 Multi-connector cable
3
Network cable
6. Turn the cable holders to keep the cables in place.
7. Put the camera base lid back in its original position and tighten the screws (torque
1.5 Nm).
8. Slide the unit holders on the network camera into the slots in the mounting bracket and
rotate the camera unit.
9. Secure the network camera to the mounting bracket by tightening the screws.
10. Install the supplied midspan, see the Installation Guide delivered with the midspan or
find it on www.axis.com
How to access the product
To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility
or AXIS Device Manager. Both applications are free and can be downloaded from
axis.com/support
For more information about using the product, see the User Manual available at axis.com
Reset to factory default settings
Further information
• For the latest version of this document, see axis.com
• The user manual is available at axis.com
• To check if there is updated firmware available for your device, see axis.com/support
• For useful online trainings and webinars, see axis.com/academy
27
EN