Axis Q6042, Руководство по установке

Страница: 20 / 164

AXIS Q60 Series
Connection Diagrams
I/O Connector
1
0 V DC (-)
2 DC output 3.3 V, max 250 mA
A
I/O configured as input
B
I/O configured as output
Install the hardware
Read all the instructions before installing the product. Some installation steps would benefit from
being completed together because they require removal of the dome cover.
NO NO
NOTICE
TICE
TICE
• Due to local regulations or the environmental and electrical conditions in which the
product is to be used, a shielded network cable (STP) may be appropriate or required.
All cables connecting the product to the network and that are routed outdoors or in
demanding electrical environments shall be intended for their specific use. Make sure that
the network devices are installed in accordance with the manufacturer’s instructions. For
information about regulatory requirements, see
Regulatory information on page 4 .
• Mount the product with the dome cover facing downward.
20