Axis Q6032 PTZ Скачать руководство пользователя страница 46

Страница: 46 / 62

AXIS Q6032 PTZ Dome Network Camera

System Options

The following traps are available:

• Cold start

• Warm start

• Link up

• Authentication failed

SNMP v3

provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be enabled, see

HTTPS, on page 40

. To enable SNMP v3, check the box and provide the initial user

password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see

Reset to Factory Default Settings, on page 49

UPnP

The Axis product includes support for UPnP

. UPnP

is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

UPnP

can be disabled under

System Options > Network > UPnP

RTP/H.264

The RTP port range and multicast settings are con

gured under

System Options > Network > RTP

The RTP port range de

nes the range of ports from which the video/audio ports are automatically selected. For multicast streams,

only certain IP addresses and port numbers should be used.

Select

Always Multicast Video

and/or

Always Multicast Audio

to start multicast streaming without opening an RTSP session.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

Bonjour can be disabled under

System Options > Network > Bonjour

Storage

SD Card

NOTICE

To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.

The Axis product supports SD cards with the following

le systems:

•

ext4

— recommended due to its resilience against data loss if the card is ejected or if there is abrupt power loss. To access

data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.

•

vFAT

— most SD cards are pre-formatted with vFAT when purchased.

If required, the SD card can be re-formatted to the desired

le system. To format the SD card:

1. Insert the SD card in the SD card slot.

2. Go to

System Options > Storage

and click

SD Card

Содержание Q6032 PTZ































































Результаты поиска

Содержание Q6032 PTZ

Отзывы:

Похожие инструкции для Q6032 PTZ

Бренды по названию

Популярные бренды

Axis Q6032 PTZ, Руководство пользователя

Результаты поиска

Содержание Q6032 PTZ

Отзывы:

Похожие инструкции для Q6032 PTZ

Бренды по названию

Популярные бренды