AXIS P5415-E PTZ Dome Network Camera
Technical specifications
Technical specifications
To find the latest version of the datasheet, go to www.axis.com > product > Support & Documentation.
LED Indicators
Status LED
Indication
Unlit
Connection and normal operation.
Green
Shows steady green for 10 seconds for normal operation after startup completed.
Amber
Steady during startup. Flashes during firmware upgrade or reset to factory default.
Amber/Red
Flashes amber/red if network connection is unavailable or lost.
Red
Firmware upgrade failure.
SD card slot
NO
NO
NOTICE
TICE
TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Disconnect power or
unmount the SD card from the product’s webpage before removal.
This product supports SD/SDHC/SDXC cards (not included).
For SD card recommendations, see
www.axis.com
Buttons
Control Button
For location of the control button, see
.
The control button is used for:
•
Resetting the product to factory default settings. See
.
•
Connecting to an AXIS Video Hosting System service. See
. To connect, press and hold the button for about 3
seconds until the Status LED flashes green.
•
Connecting to AXIS Internet Dynamic DNS Service. See
. To connect, press and hold the button for about 3 seconds.
Connectors
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
NO
NO
NOTICE
TICE
TICE
The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall
be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s
instructions. For information about regulatory requirements, see the Installation Guide available at
www.axis.com
62
