Axis P1311, Руководство по установке

Страница: 14 / 86

Page 14 AXIS P1311 Installation Guide
Unit connectors
Network connector -
RJ-45 Ethernet connector. Supports Power over Ethernet. Using shielded
cables is recommended.
Power connector -
2-pin connector block used for power input.
Audio in -
3.5mm input for a mono microphone, or a line-in mono signal (left channel is used from
a stereo signal).
Audio out -
Audio output (line level) that can be connected to a public address (PA) system or an
active speaker with a built-in amplifier. A pair of headphones can also be attached. A stereo
connector must be used for the audio out.
SDHC memory card slot
- The high capacity SD memory card can be used for local recording with
removable storage.
To insert an SD card, lift the SD card cover on the rear of the AXIS P1311, and carefully insert the
SD card into its slot.
To remove an SD card lift the cover and gently push the card in and release it. The SD card will back
out of the slot where it can then be removed.
Function Pin number Description
GND 1 Ground
DC Power 2 Power input 8-20V DC, max 2.8W. 1 2
SD memory card slot