Axis M5075-G Скачать руководство пользователя страница 32

Страница: 32 / 34

AXIS M5075-G PTZ Camera

Specifications

Product overview

Microphone

Status LED indicator

microSD card slot

Network connector (PoE)

Control button

Part number (P/N) and serial number (S/N)

LED indicators

Status LED

Indication

Unlit

Connection and normal operation.

Green

Shows steady green for 10 seconds for normal operation after startup completed.

Amber

Steady during startup. Flashes during firmware upgrade or reset to factory default.

Amber/Red

Flashes amber/red if network connection is unavailable or lost.

SD card slot

NOTICE

TICE

• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the

SD card. Use your fingers to insert and remove the card.

• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card

from the product’s webpage before removal.

This product supports microSD/microSDHC/microSDXC cards.

For SD card recommendations, see

axis.com

microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are

trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

Содержание M5075-G



































Результаты поиска

Содержание M5075-G

Отзывы:

Похожие инструкции для M5075-G

Бренды по названию

Популярные бренды

Axis M5075-G, Руководство пользователя

Результаты поиска

Содержание M5075-G

Отзывы:

Похожие инструкции для M5075-G

Бренды по названию

Популярные бренды