Page 12
AXIS M31-VE Network Camera Series
Installation Guide
AXIS Camera Management - multiple cameras/large installations
AXIS Camera Management can automatically discover multiple Axis devices, show connection
status, manage firmware upgrades, and set IP addresses.
Automatic discovery
1. Check that the camera is connected to the network and that power has been applied.
2. Start AXIS Camera Management. When the camera appears in the window, right-click the link
and select
Live View Home Page
.
3. See page 13 for instructions on how to set the password.
Assign an IP address in a single device
1. Select one of the AXIS M31-VE Network Camera Series in AXIS
Camera Management and click the
Assign IP
button
.
2. Select
Assign the following IP address
and enter the IP
address, the subnet mask, and default router the device will use.
3. Click
OK
.
Assign IP addresses in multiple devices
AXIS Camera Management speeds up the process of assigning IP
addresses to multiple devices, by suggesting IP addresses from a
specified range.
1. Select the devices you wish to configure (different models can be
selected) and click the
Assign IP
button
.
2. Select
Assign the following IP address range
and enter the range
of IP addresses, the subnet mask, and default router the devices will use.
3. Click the OK button.
