Axis F34 Скачать руководство пользователя страница 13

Страница: 13 / 64

AXIS F34 Main Unit

Access the Product

Controls on the Live View Page

Click the

View size

buttons to show the image in full size (right button) or to scale down the image to

fit the browser window (left button).

Click

WDR on

to enable WDR in intense backlight conditions. Click

WDR off

to disable WDR in low

light conditions for optimal exposure.

Select a stream profile for the Live View page from the

Stream Profile

drop-down list. For information

about how to configure stream profiles, see

page 23

The

Manual Trigger

button is used to trigger an action rule from the Live View page. For information

about how to configure and enable the button, see

Manual Trigger on page 13

Click

Snapshot

to save a snapshot of the video image. This button is primarily intended for use when

the AXIS Media Control viewer toolbar is not available. Enable this button from

Live View Config >

Action Buttons

Manual Trigger

The

Manual Trigger

is used to trigger an action rule from the Live View page. The manual trigger can for example be used to

validate actions during product installation and configuration.

To configure the manual trigger:

1. Go to

Setup > Events

2. Click

Add

to add a new action rule.

3. From the

Trigger

drop-down list, select

Input Signal

4. From the second drop-down list, select

Manual Trigger

5. Select the desired action and configure the other settings as required.

For more information about action rules, see

Events on page 36

To show the manual trigger buttons in the Live View page:

1. Go to

Setup > Live View Config

2. Under

Action Buttons

, select

Show manual trigger button

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See

AXIS Media Control (AMC) on page 15

for more

information. The toolbar displays the following buttons:

The

Play

button connects to the Axis product and starts playing a media stream.

The

Stop

button stops the media stream.

Содержание F34

































































Результаты поиска

Содержание F34

Отзывы:

Axis F34, Руководство пользователя, Страница: 13 / 64

Результаты поиска

Содержание F34

Отзывы: