Axis F34 Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 64

Axis F34 Скачать руководство пользователя страница 59

AXIS F34 Main Unit

Technical Specifications

max 12.27 W; 8-28 V DC, max 12.58 W

Connectors

Female RJ45 for 10BASE-T/100BASE-TX PoE
RJ12 for sensor units
2-pin terminal block for 8-28 V DC input

Edge storage

Support for recording to dedicated network-attached storage. For SD card and NAS recommendations, see

www.axis.com

Two SD/SDHC/SDXC slots supporting memory card up to 64 GB (card not included)

Operating
conditions

0 °C to 40° C (32 °F to 104 °F)
Humidity 10-85% RH (non-condensing)

Storage
conditions

-40 °C to 65 °C (-40 °F to 149 °F)

Approvals

IEC/EN/UL 60950-1, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-78, EN 55024,
EN 61000-6-1, EN 61000-6-2, EN 61000-3-2, EN 61000-3-3, EN 50581, IEC 60529 IP32
EN 55022 Class B, FCC Part 15 Subpart B Class B, ICES-003 Class B, VCCI Class B, C-tick AS/NZS CISPR 22 Class B,
KCC KN22 Class B, KN24

Dimensions

30 x 121 x 121 mm (1 3/16 x 4 12/16 x 4 12/16 in)

Weight

238 g (0.52 lb)

Included
accessories

Rubber feet, Mount bracket
Installation Guide, Windows decoder 1-user license, AVHS Authentication key

Optional
accessories

AXIS T8120 15 W Midspan 1-port, AXIS T8129 PoE Extender, Network cable coupler indoor slim, Mains adaptor PS-P
terminal connector, AXIS Surveillance microSDXC Card 64GB

Video
management
software

AXIS Camera Companion, AXIS Camera Station, Video management software from Axis’ Application Development
Partners available on

www.axis.com/techsup/software

Warranty

Axis 3-year warranty and AXIS Extended Warranty option, see

www.axis.com/warranty

a.

Information may vary depending on the sensor unit

b.

Information may vary depending on the sensor unit

c.

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/), and

cryptographic software written by Eric Young ([email protected]).

AXIS F Sensor Units

Models

Sensor units

with option of 3-m or 12-m (10-ft or 39-ft) cable:

AXIS F1005-E:

Standard, IP66/IP67-rated

AXIS F1015:

Varifocal

AXIS F1025:

Pinhole

AXIS F1035-E:

Fisheye, IP66/IP67-rated

Camera

Image sensor

AXIS F1005-E/AXIS F1015/AXIS F1025/AXIS F1035-E:

1/2.8” (effective) progressive scan RGB CMOS

Lens

Fixed iris

AXIS F1005-E:

2.8 mm, F2.0: 113° view; 73° viewin HDTV 720p

a

AXIS F1015:

3-6 mm, F2.0: 108° to 53° view ; 65° to 35° viewin HDTV 720p

AXIS F1025:

3.7 mm, F2.5: 92° view ; 56° viewin HDTV 720p

AXIS F1035-E:

1.3 mm, F2.8: 194° view; 112° view in HDTV 720p

Minimum
illumination

Color: 0.3 lux

Shutter time

With AXIS F34:

1080p 12.5/15 fps: 1/22500 s to 2 s;
HDTV 720p 25/30 fps: 1/28000 s to 2 s

With AXIS F41:

59

«
...
57
58
59
60
61
...
»

Содержание F34

































































Отзывы:

Нет отзывов