Axis F34 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 64

Axis F34 Скачать руководство пользователя страница 23

AXIS F34 Main Unit

Video

You can add a new mask, re-size the mask with the mouse, choose a color for the mask, and give the mask a name.

For more information, see the online help

Important

Adding many privacy masks may affect the product’s performance.

Note

Privacy mask is not available for the quad stream. However, privacy masks configured on each channel will be displayed
in the quad.

Stream Profiles

A stream profile is a set of predefined stream settings including resolution, compression, frame rate and overlay settings. Stream
profiles can be used:

•

When setting up recording using action rules. See

Events on page 36

•

When setting up continuous recording. See

Continuous Recording on page 41

•

In the Live View page – select the stream profile from the

Stream profile

drop-down list.

For quick setup, use one of the predefined stream profiles. Each predefined profile has a descriptive name, indicating its purpose. If
required, the predefined stream profiles can be modified and new customized stream profiles can be created.

To create a new profile or modify an existing profile, go to

Setup > Video

>

Stream Profiles

.

To select a default stream profile for the Live View page, go to

Setup > Live View Config

.

ONVIF Media Profiles

An ONVIF media profile consists of a set of configurations that can be used to change media stream settings. ONVIF media profiles
can be set through the ONVIF Media Profile Settings page and be used by a client to configure media stream properties.

The

ONVIF Media Profiles

page lists all such pre-configured profiles. These profiles cannot be removed. Pre-configured media

profiles have been included in the product for quick setup. It is also possible to configure new ONVIF media profiles as per required
specifications. To add a new ONVIF media profile, click

Add

and enter the required information. You can also modify or remove a

profile from this page.

Image Synchronization

It is possible to synchronize two or more sensor units in terms of frames and exposure.

Frame synchronization is automatic in the case of identical sensor units that have the same capture mode.

To synchronize exposure go to

Video

>

Image Synchronization

. Under

Exposure synchronization

it is possible to group the cameras

as one or two groups. Within each group the camera that is selected first becomes the

Master

and the other cameras synchronize

their exposures accordingly.

Overlay

Overlays are used to provide extra information, such as forensic video analysis or during product installation and configuration.
Overlays are superimposed over the video stream.

An overlay text can display the current date and time, or a text string.

When using a text string, modifiers can be used to display information such as the current bit rate or the current frame rate.

23

«
...
21
22
23
24
25
...
»

Содержание F34

































































Отзывы:

Нет отзывов