10
USER MANUAL
_____________________________________________________________________________________________________________________
9.
General rules
1.
Before each measurement make sure that zero indicator is displayed. If zero
indicator does not displayed or “----“ communicate appears, press
→
0
←
key
and wait until zero indication and zero indicator appears.
2.
The scale is equipped with a tare equal to its range. To tare the scale press
→
T
←
key (left or right). Storing a tare value does not extend measuring range,
but only subtracts it from a load placed on a pan. To make weight control easier
and to avoid range overdrawing, the scale is equipped with a load indicator
(graduated in percentages).
3.
Weighing result should be read when the indicator "
" lights, which signalises
stabilisation of a result.
4.
When the scale is not used but it is necessary to be ready to work immediately, it
can be switched off by pressing I/ key. The scale reading system is then
switched off to "standby" mode (signalled by the indicator "OFF" in version
with the LCD display). To switch the scale on press I/ key. The scale is
immediately ready to operate maximum accuracy (after self tests).
5.
Weighed sample should be placed in the centre of the pan.
Protect the scale against dust, aggressive dusts and liquids. To clean the
scale wash it with water with soap and dry it afterwards
.
Place the scale on a platform to avoid dropping weighed objects
on the pan.
Do not overload the scale more then 20% of maximum load (Max).