Axis 27980R1, Руководство пользователя

Страница: 60 / 262

Setting Up - IBM Mainframe (zSeries)
60 AXIS 5570e User’s Manual
Example continues
Although it is not recommended, it is possible to drive the printer with
just one FSA, if one of the following conditions are met:
• All the resources in the resource libraries are resolution-independent,
and all the jobs that use inline resources or user libraries contain
resources that are resolution-independent.
• All jobs that request a resolution that is different from the resolution-
dependent resources in the PSF system and security libraries contain the
resources at the requested resolution, either as inline resources or in the
user's library.
Even if a PSF user requests 120-pel resolution for an AFP print job being
sent to the printer, PSF requires 240-pel resources from the library. Do
not store 120-pel resources in the library.
CONT...
//* ************************************************************ */
//* PRINTDEV
//* ************************************************************ */
//PRT1 CNTL
//PRT1 PRINTDEV FONTDD=*.FONT01, /* 240 PEL FONT LIBRARY DD */
//* /* <-- SEE REQUIRED ACTIONS */
//* /* ABOVE */
//*PRT1 PRINTDEV FONRDD=*.FONT02, /* 300 PEL FONT LIBRARY DD */
//* /* <-- SEE REQUIRED ACTIONS */
//* /* ABOVE */
// OVLYDD=*.OLAY01, /* OVERLAY LIBRARY DD */
// PSEGDD=*.PSEG01, /* SEGMENT LIBRARY DD */
// PDEFDD=*.PDEF01, /* PAGEDEF LIBRARY DD */
// FDEFDD=*.FDEF01, /* FORMDEF LIBRARY DD */
// JOBHDR=*.JOBHDR, /* JOB HEADER SEPARATOR */
//* /* OUTPUT */
// JOBTRLR=*.JOBTLR, /* JOB TRAILER SEPARATOR */
//* /* OUTPUT */
// DSHDR=*.DSHDR, /* DATA SET HEADER */
//* /* SEPARATOR */
// MESSAGE=*.MSGDS, /* MESSAGE DATA SET OUTPUT */
// BUFNO=5, /* NUMBER OF WRITE DATA BUFFERS*/
// PAGEDEF=A06462, /* DEVICE PAGEDEF DEFAULT */
// FORMDEF=A10110, /* DEVICE FORMDEF DEFAULT */
// CHARS=(GF10, /* DEVICE */
// GS10,TU10,GU10), /* DEFAULT FONT SET */
// PIMSG=YES, /* ACCUMULATE DATA SET */
//* /* MESSAGES */
// DATACK=BLOCK, /* REPORT ALL DATA-CHECK */
//* /* ERRORS */
// TRACE=NO, /* CREATE INTERNAL TRACE */
// FAILURE=WCONNECT, /* PSF ACTION ON PRINTER */
//* /* FAILURE */
// TIMEOUT=REDRIVE, /* PSF ACTION ON TIMEOUT */
// MGMTMODE=IMMED, /* PRINTER MANAGEMENT MODE */
// DISCINTV=40, /* DISCONNECT INTERVAL IN */
//* /* SECONDS */
// IPADDR=’xxx.xxx.xxx.xxx’ /* Axis Network Print Server IP
ADDRESS */
// PORTNO=’5100’, /* TCP/IP PORTO */
//PRT1 ENDCNTL