manualshive.com logo in svg

Axis 27980R1, Руководство пользователя

Поделиться
Скачать
Axis 27980R1 Скачать руководство пользователя страница 12

Product Overview

12

AXIS 5570e User’s Manual

Print Server Features and Benefits

Reliability

The Axis Network Print Server print server provides high performance 

and reliability combined with low power consumption. The electronic 

circuits are based on the AXIS ETRAX 100LX chip, which comprises an 

integrated 32 bit RISC processor and associated network controllers.

Flexibility

In the IBM Mainframe and AS/400 environment, the Axis Network Print 

Server can emulate IBM twinax and coax print and control functionality. 

This means that the Axis Network Print Server can effectively replace 

coax/twinax attached printers and control units on the LAN.

It supports printing in all the major computer systems and environments, 

including five different print methods in the TCP/IP environment. The 

integrated IPP (Internet Printing Protocol) function allows for printing 

from LAN to LAN via a WAN, such as the Internet.

Speed

The  AXIS ETRAX 100LX  chip has been specifically designed for LAN 

products. It supports data transfer rates of up to 200 Mbit/s (100 Mbit 

Ethernet full duplex). High speed Centronics communication such as ECP, 

Hewlett-Packard Fast Mode, High Speed and IBM Fast Byte is supported.

Easy to Install

The print server installs, operates and is managed in a reliable and easy 

fashion. 

Security

You can assign a password to restrict login and printer access. It is also 

possible to disable protocols and to configure a secure mode (https). See 

“Enabling Secure Web Services — SSL/TLS” on page 163.

Monitoring

The internal print server Web pages and AXIS ThinWizard (3.04 and up) 

allow you to continuously monitor printer status. The Web pages are used 

to monitor single Axis units while AXIS ThinWizard can be used to 

monitor multiple Axis units. Integrity of your printing is also monitored 

via interactive communication with the IBM host.

The AXIS 5570e additionally supports SNMP for remote monitoring.

Futureproof

The firmware stored in the print server Flash memory can be upgraded 

over the network. This allows you to quickly update and enhance its 

operational features when new print server software becomes available. 

See “Upgrading the Firmware” on page 169.

NetWare Packet

Signature

The print server supports NetWare Packet Signature Level 1, 2, 3, which 

protects servers and clients using the NetWare Core Protocol services. 

NCP packet signature prevents packet forgery by requiring the server and 

the client to sign each NCP packet. See your Novell NetWare 

documentation for detailed information.

Содержание 27980R1







































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды