Setting Up - IBM Mainframe (zSeries)
48
AXIS 5570e User’s Manual
Summary of a report generated by Generate Server
Configuration Report (bold text = not default).
Verifying the
Communication:
Follow the steps below to test the communication by sending a print job
to the Axis Network Print Server.
1. Make sure the printer is connected to the Axis Network Print Server and
the corresponding LU in the host is activated.
2. Send a print job from the host.
The Axis Network Print Server is now ready for use. If needed, it can be
further adapted to your system using the Web-based configuration pages
or IBM Printer Emulation. Please refer to
Extended IBM Printer
Emulation
, on page 179.
LU id
Category
VTAM LU Name
Type
Mod
Termination
Method
0
Public
14
2
TSELF
4
Public
BRLTST04
1
2
TSELF
5
Public
BRLTST05
1
2
TSELF
6
Public
BRLTST06
1
2
TSELF
7
Public
BRLTST07
1
2
TSELF
8
Public
BRLTST08
1
2
TSELF
9
Public
BRLTST09
1
2
TSELF
10
Public
BRLTST0A
1
2
TSELF
11
Public
BRLTST0B
1
2
TSELF
PU Profile Names
NetWare SAA
Maximum connections per client
5
Use IP client name
No
TN3270 NetWare User ID
Admin
Client Response Timer
120
Printer End of Job Timer
9999
You can check the status of the TN3270E connection by printing a test page from the Print
Server. This is done by pressing the test button once. Make sure the TN3270E status (St:) line
for your server connection is defined as either:
•
SSCP
•
LU-1
•
LU-3
For additional information about configuring other TN3270E servers, refer to the Technical
Notes on www.axis.com
