SBC86840 Series All-In-One Mini ITX Board User’s Manual
Jumpers and Connectors
30
2.4.13 USB Port 4/5/6/7 Connectors: CN16, CN22
These Universal Serial Bus (USB) connectors on this board are for
installing versatile USB interface peripherals. These are 10-pin
standard USB connectors.
Pin
Description
Pin
Description
1 +5V
2 +5V
3 USB4-
4 USB5-
5 USB4+
6 USB5+
7
Ground (GND)
8
Ground (GND)
9
Ground (GND)
10
Ground (GND)
CN16
Pin
Description
Pin
Description
1 +5V
2 +5V
3 USB7-
4 USB6-
5 USB7+
6 USB6+
7
Ground (GND)
8
Ground (GND)
9
Ground (GND)
10
Ground (GND)
CN22
2.4.14 Parallel IDE Connector: CN17
An IDE device can be connected to the computer via an IDE connector.
One IDE connector is for one single IDE cable to connect two IDE
devices. If you want to install two IDE devices, please configure one
IDE device as Master, and the other as Slave by setting the jumper.
Please refer to next page for the detailed CN17 pin assignment.
StockCheck.com
Downloaded from StockCheck.com