background image

 

 

ii 

Disclaimers 

 

This manual has been carefully checked and believed to contain 
accurate information. AXIOMTEK Co., Ltd. assumes no responsibility 
for any infringements of patents or any third party’s rights, and any 
liability arising from such use.  

AXIOMTEK does not warrant or assume any legal liability or 
responsibility for the accuracy, completeness or usefulness of any 
information in this document. AXIOMTEK does not make any 
commitment to update the information in this manual. 

AXIOMTEK reserves the right to change or revise this document 
and/or product at any time without notice. 

No part of this document may be reproduced, stored in a retrieval 
system, or transmitted, in any form or by any means, electronic, 
mechanical, photocopying, recording, or otherwise, without the prior 
written permission of AXIOMTEK Co., Ltd.

 

 

CAUTION 

If you replace wrong batteries, it causes the danger of explosion. It is 
recommended by the manufacturer that you follow the manufacturer’s 
instructions to only replace the same or equivalent type of battery, 
and dispose of used ones.   

©

Copyright 2007 AXIOMTEK Co., Ltd. 

All rights reserved. 
May 2007, Version A1 
Printed in Taiwan

 

Содержание SBC84830 Series

































































Отзывы: