AXIOMTEK SBC84830 Series, Руководство пользователя

Страница: 23 / 64

SBC84830 Series All-In-One ECX Board User’s Manual
Jumpers and Connectors 17
2.4.11 Ethernet Connector: LAN1
The RJ-45 connector is used for Ethernet. To connect the board to
100-Base-T or 1000-Base-T hub, just plug one end of the cable into
LAN1
and connect the other end (phone jack) to a 100-Base-T hub or
1000-Base-T hub.
Pin Signal
1 Tx+ (Data transmission positive)
2
Tx- (Data transmission negative)
3
Rx+(Data reception positive)
4 RJ-1(For 100 base T-Only)
5 RJ-1(For 100 base T-Only)
6 Rx- (Data reception negative)
7 RJ-1(For 100 base T-Only)
8
RJ-1(For 100 base T-Only)
A
Active LED
B 100/1000 LAN LED
LAN1
2.4.12 Extension Slot: J1
Pin Signal Pin Signal
1 SDVOC_RED 2 SDVOC_INT
3 SDVOC_RED# 4 SDVOC_INT#
5 GND 6 GND
7 SDVOC_BLUE 8 SDVOC_GREEN
9 SDVOC_BLUE# 10 SDVOC_GREEN#
11 GND 12 GND
13 SDVO_FLDSTALL 14 SDVOC_CLK
15 SDVO_FLDSTALL# 16 SDVOC_CLK#
17 GND 18 GND
19 BKLCTL2 20 SDVO_CTRLCLK
21 PCIE_WAKE# 22 SDVO_CTRLDATA
23 GND 24 GND
25 ICH_PE_TXP2 26 ICH_PE_RXP2
27 ICH_PE_TXN2 28 ICH_PE_RXN2
J1