SBC82621 Socket370 Half-size All-in-One CPU Card User’s Manual
Boot Other Device
This item allows the user to enable/disable the boot device
not listed on the First/Second/Third boot devices option
above. The default setting is
Enabled
.
Swap Floppy Drive
This allows you to determine whether to enable Swap
Floppy Drive or not. When enabled, the BIOS swaps floppy
drive assignments so that Drive A becomes Drive B, and
Drive B becomes Drive A. By default, this field is set to
Disabled.
Boot Up Floppy Seek
When enabled, the BIOS seeks for number of track (40 or
80) of the installed floppy drive. 360K type has 40 tracks
while 760K, 1.2M and 1.44M have 80 tracks. By default,
this field is set to
Enabled.
Boot Up NumLock Status
This activates the NumLock function after powering up the
system. By default, the system boots up with
NumLock
ON.
Gate A20 Option
This selects how Gate A20 is worked. Gate A20 is a device
used to address memory above 1 MB. The default setting is
Fast.
Typematic Rate Setting
When disabled, continually holding down any key on your
keyboard will generate only one instance. When enabled,
you can set the two typematic controls listed next. By
default, this field is set to
Disabled.
Typematic Rate (Chars/Sec)
When the typematic rate is enabled, the system registers
repeated keystrokes speeds. You can select speed range
from 6 to 30 characters per second. By default, this item is
set to
6.
Award BIOS Utility
37
