AXIOMTEK SBC8241, Руководство пользователя

Страница: 18 / 50

SBC8241 486 All-in-One Half-size User’s Manual
Installation
#1
%" ! '
1. Place the CPU at the middle of the socket, orienting
its pin 1 (notched corner) with pin 1 of the socket.
2. Align the CPU to the socket in order to avoid
breaking the pins.
3. Mount the CPU carefully onto the socket.
4. Be sure to configure the jumper settings of JP1, JP2,
JP3 and JP4.
NOTE:
When the CPU speed over 75MHz, a CPU COOLER
to reduce CPU temperature is highly
recommended.
%% !$ '& !
$>
1. Configure the jumpers according to your system
configuration and the corresponding jumper
settings listed in Chapter 2.
2. Make sure the power is OFF.
3. Firstly when using PC/104 peripherals, install the
PC/104 card into the PC/104 socket of the half-sized
486 CPU card.
4. Install the half-sized 486 CPU card into an ISA
passive backplane or just let it stand alone as a
Single Board Computer.
5. Connect the I/O cables and peripherals, i.e. floppy
disk, hard disk, monitor, keyboard, power supply,
etc..
NOTE:
The color of pin one on I/O cables is usually red or
blue, while others are gray.
6. Turn ON the system power.