AXIOMTEK SBC82400, Руководство пользователя

Страница: 54 / 57

SBC82400 ISA Half-Size CPU Board Series User’s Manual
Award BIOS Utility
48
4.2.7 Set Password
ENTER PASSWORD:
Type the password with eight characters at most, and press
<Enter>. The password typed will now clear any previously
entered password from CMOS memory. Then, confirm the
password by typing the password again and pressing <Enter>.
Or, not enter a password and abort the selection by pressing
<Esc>.
To disable the password by pressing <Enter> without typing in
any password when the message
“ Enter Password ” is showed.
Then, message below will appear to confirm that the password
has been disabled.
PASSWORD DISABLED.
Once the password is disabled, the system will boot and enter
Setup freely.
When a password is enabled, it has to be typed to enter the
Setup every time. This prevents any unauthorized person from
changing the system configuration.
Additionally when a password is enabled, the BIOS can also set
to request a password every time the system reboots. This
would prevent unauthorized use of the computer.
The user can determine when the password is required within
the BIOS Features Setup Menu and its Security option. If the
Security option is set to
“ System ” , the password is required
during boot up and entry into Setup. If it set as “ Setup ” ,
prompting will only occur prior to entering Setup.